HP StorageWorks XP Remote Web Console Software User Manual
Page 66
66
XP Performance Control Export Tool
RCCLPR
Use this operand to export statistics about remote copy operations, which appear in the XP Continuous
Access pane and the TCz Monitor pane. By using this operand, you can export monitoring data about
remote copy operations performed by XP Continuous Access and TrueCopy for z/OS at each CLPR.
When statistics are exported to a ZIP file, the file name is RCCLPR_dat.ZIP. For details about statistics
exported by this operand, see
NOTE:
Monitoring data is grouped by SLPR, and is exported per CLPR. If there are two SLPRs that are
SLPR0 (corresponding to CLPR0 and CLPR2) and SLPR1 (corresponding to CLPR1), those CLPRs are
arranged as follows: CLPR0,CLPR2,CLPR1.
XP Continuous Access Journal
Use this operand to export statistics about remote copy operations, which appear in the Cnt Ac-J
Monitor pane and the URz Monitor pane. By using this operand, you can export monitoring data
about remote copy operations performed by XP Continuous Access Journal and Universal Replicator
for z/OS in the whole array. When statistics are exported to a ZIP file, the file name is
UniversalReplicator.ZIP
. For details about statistics exported by this operand, see
URJNL
[[JNL-group-id]:[JNL-group-id]][...]|
Use this operand to export statistics about remote copy operations, which appear in the Cnt Ac-J
Monitor pane and the URz Monitor pane. By using this operand, you can export monitoring data
about remote copy operations performed by XP Continuous Access Journal and Universal Replicator
for z/OS at each journal group. When statistics are exported to a ZIP file, the file name is
URJNL_dat.ZIP
. For details about statistics exported by this operand, see
When specifying the JNL-group-id variable, you can narrow the range of journal groups whose
monitoring data is exported. JNL-group-id is a journal group number. The colon (:) indicates a
range. For example, 00:05 indicates journal groups from 00 to 05.
Ensure that the JNL-group-id value on the left of the colon is smaller than the JNL-group-id
value on the right of the colon. For example, you can specify URJNL 00:05, but you cannot specify
URJNL 05:00
.
If JNL-group-id is not specified, monitoring data for all journal volumes is exported.
URLU
[[port-name.host-group-id]:[port-name.host-group-id]][...]|
Use this operand to export statistics about remote copy operations, which appear in the Cnt Ac-J
Monitor pane and the URz Monitor pane. By using this operand, you can export monitoring data
about remote copy operations performed by XP Continuous Access Journal and Universal Replicator
for z/OS at each LU path. When statistics are exported to a ZIP file, the file name is
URLU_dat.ZIP
.
For details about statistics exported by this operand, see
.
When specifying the port-name.host-group-id variable, you can narrow the range of LU paths
whose monitoring data is exported. port-name. host-group-id is the ID of a host group. The
host-group-id
must be a hexadecimal numeral. The colon (:) indicates a range. For example,
CL1-C.01:CL1-C.03
indicates the range from host group #01 of the CL1-C port to host group #03
of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon. Note
that the smallest port-name value is CL1-A and the largest port-name value is CL4-r. The following
formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify URLU CL1-C.01:CL2-A.01, but you cannot specify
URLU CL2-A.01:CL1-C.01
. Also, you can specify URLU CL1 C.01:CL1 C.03, but you cannot
specify URLU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, monitoring data for all LU paths is exported.
URLDEV
[[CU-id]:[CU-id]][...]
Use this operand to export statistics about remote copy operations, which appear in the Cnt Ac-J
Monitor pane and the URz Monitor pane. By using this operand, you can export monitoring data