HP XP Racks - Manual (Page 158)

To adjust the number of messages to be output per monitoring
interval:
1
.
In the Hitachi Network Objectplaza Trace Library setup menu, type 6 and
then press the Enter key.
A screen to set the monitoring interval for the amount of messages
output to the integrated trace file will appear. The current value is
displayed in Current Span (sec).
2
.
Enter a desired interval in New Span (sec).
The specifiable range is between 0 and 3600 seconds, with a default of 0.
We recommend setting a value of 0.
To leave the monitoring interval as is, leave New Span (sec) blank,
type ! and press the Enter key. You will be returned to the Hitachi
Network Objectplaza Trace Library setup menu.
Note that when you specify a monitoring interval of 0, even if you specify
the maximum number of messages in 7: Max messages per span, the
amount of integrated trace information to be output will not be adjusted.
3
.
Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
4
.
In the Hitachi Network Objectplaza Trace Library setup menu, type 7 and
press the Enter key.
A screen to set the maximum number of messages output to the
integrated trace file based on the monitoring interval specified in 6:
Lookout span will appear. The current value is displayed in Current
Max (sec).
5
.
Adjust the maximum number of messages output to the integrated trace
files in New Max (sec).
The specifiable range is between 0 messages and 500 messages, with a
default of 0. If you want to increase the number of messages which are
output to the integrated trace file as much as possible, we recommend
setting a value of 0.
When you specify a monitoring interval of 0 in 6: Lookout span, the
value set in New Max (sec) will be disregarded.
3-92
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for AIX) User Guide