HP Optical Jukeboxes - Manual (Page 63)

Chapter 3 3-25
Operating the Jukebox
Changing SCSI IDs
Operat
ing t
h
e
Jukebo
x
CAUTION Do not turn power to STANDBY in this jukebox until you are sure the
SCSI bus is inactive. Removing power from a SCSI peripheral when the
bus is active can result in data loss and/or indeterminate bus states.
Check your host system manuals for information about checking the
SCSI bus status.
8. Switch the jukebox standby/on switch to STANDBY, the back to ON
to save the new SCSI ID in jukebox memory.