HP Optical Jukeboxes - Manual (Page 30)

1-18 Chapter 1
Setting up the Jukebox
Moving or Shipping the Jukebox
5. Secure the mailslot by inserting the mailslot shipping bracket. Refer
to page 1-6 for a description of this bracket.
The shipping bracket slides into the mailslot easily, but will not latch.
Place a piece of tape across the bracket to keep it in place.
6. Re-insert the shipping screw that was removed when the jukebox was
unpacked. This screw is 6/32 UNC-2B cap screw 1 3/4 inches long.
Re-install in the position shown in Figure 1-3. This screw is HP part
number 2360-0551 and may be ordered from HP DIRECT.
7. Repack the jukebox in its original shipping carton.
An alternative method of shipping is careful packaging and padded
van shipping.