HP Optical Jukeboxes - Manual (Page 59)

Chapter 3 3-21
Operating the Jukebox
Using the Front Panel Features
Operat
ing t
h
e
Jukebo
x
Start with READY or SECURE in the display.
1. Press NEXT until INFO * appears in the display window.
2. Press ENTER . A flashing 0 displays
3. Press NEXT until the desired log number displays.
4. Press ENTER . If you select any log except 4 (drive cartridge loads), the
log information displays immediately.
If you select log 4, DRIVE 1 displays and you can press ENTER for Drive
1 information. If your jukebox has two optical drives, you can press
NEXT (DRIVE 2 displays) and ENTER to access Drive 2 information.
5. Press ENTER to stop the INFO * display.
To choose another log, press NEXT or PREV .
6. Press CANCEL to return to READY.
Table 3 -2 Information Logs
No. Description
1 Firmware revision of the jukebox
4 Total cartridge loads for the drive.
5 Operation hours (power on time)
9 Total moves and move attempts by the
disk transport mechanism.
12 Total disk transport mechanism flips.
14 Total mailslot rotations.
16 Optical drive 1 SCSI ID.
17 Optical drive 2 SCSI ID (if installed)
Other logs are used by service.