HP Optical Jukeboxes - Manual (Page 55)

Chapter 3 3-17
Operating the Jukebox
Using the Front Panel Features
Operat
ing t
h
e
Jukebo
x
displays. NO CONFIG displays if you choose an invalid number.
4. Press ENTER .
The current default setting displays. It may be any one of these
settings
• OFF or ON
• a number
5. Select the option you want by pressing NEXT or PREV .
6. Press ENTER . SET displays.
The security option is set.
7. Press CANCEL to return to READY.
CAUTION The next step is to turn the jukebox to STANDBY.
Do not turn power to STANDBY in this jukebox until you are sure the
SCSI bus is inactive. Removing power from a SCSI peripheral when the
bus is active can result in data loss and/or indeterminate bus states.
Check your host system manuals for information about checking the
SCSI bus status.
1. Turn the jukebox to STANDBY, then ON to save the code to the
jukebox memory.
Table 3-1 Configurations
Number Function Default Settings
0-14 Used by service personnel only. Changing these configurations may result
in an inoperable jukebox.
15 Enables or
prevents manual
disk removal. Off On - disks cannot be loaded or ejected.
Off - disks can be loaded and ejected.
Requires entering the current security
code.
16 Set default
configurations Save Clear - restores default configurations
immediately.
Save - maintains all set configurations.