HP Optical Jukeboxes - Manual (Page 24)

1-12 Chapter 1
Setting up the Jukebox
Connecting the Jukebox with Other SCSI Peripherals
IMPORTANT Although this jukebox connects to a 68-pin SE/LVD “wide” SCSI bus and
host adapter, the jukebox and its optical drives use a 50-pin “narrow”
SCSI bus internally. See Appendix B for a discussion of SCSI buses.
Do not force “wide” data transfers.
Figure 1-5 Connecting the Jukebox With Other SCSI Peripherals
The default IDs for the jukebox are as follows. Check to see if there will be
any conflicts in this installation. If you are installing another of this
model jukebox on the same bus you have conflicts.
Autochanger (jukebox robotics) = 3
Drive 1 = 4
Drive 2 = 5 (if installed)