HP Optical Jukeboxes - Manual (Page 51)

Chapter 3 3-13
Operating the Jukebox
Using the Front Panel Features
Operat
ing t
h
e
Jukebo
x
2).
14. Press NEXT until the second number you want in your security code
displays.
15. Press ENTER . NEW 3 and a flashing digit displays (the previous code
3).
16. Press NEXT until the third number you want in your security code
displays.
17. Press ENTER . SET 17 displays briefly.
18. Press CANCEL to return to READY.
CAUTION The next step is turn the jukebox to STANDBY.
Do not turn power to STANDBY in this jukebox until you are sure the
SCSI bus is inactive. Removing power from a SCSI peripheral when the
bus is active can result in data loss and/or indeterminate bus states.
Check your host system manuals for information about checking the
SCSI bus status.
19. Turn the jukebox to STANDBY, then ON to save the code in jukebox
memory.
NOTE You can limit access to your jukebox by setting certain security options.
See Table 3-1 for information about configurations 15, 20, 31, and 32.
Customizing the Operation of the Jukebox
You can customize the way the jukebox operates by setting values in its
“configurations.”. See Table 3-1 for a list of these configurations, their
default settings, and possible settings.
NOTE Your security code is required to change security configurations 15, 17,
20, 31, and 32.