HP Optical Jukeboxes - Manual (Page 44)

3-6 Chapter 3
Operating the Jukebox
Understanding Display Window Messages
OPEN MS - select to open the mailslot (Configuration 32 is set, see
description in Table 1)
LOAD * - select to load disks through the mailslot
EJECT * - select to eject disks through the mailslot
TEST * - select to run internal jukebox tests (tests are for service only
CONF * - select to customize the way the jukebox functions
(CONFigurations)
INFO * - select to retrieve performance information
SCSI ID * - select to set the SCSI IDs for the jukebox controller
and the optical drive mechanisms.
NOTE An “*” indicates there are options that must be set with that operation.
Press
ENTER to go to the submenu that allows you to set these options.
The next section explains how to set these options.
Pressing CANCEL one or two times brings the jukebox back to the READY
display.
Messages During Host Operations
Some disk operations initiated by the host computer will cause messages
to be displayed. The following are examples of these messages.
LOAD 15 - the host computer selected the disk in slot 15 for insertion into
a drive
MOVING - the disk transport mechanism is moving a disk
STORE 1 - the host computer selected slot 1 to store a disk