HP Optical Jukeboxes - Manual (Page 54)

3-16 Chapter 3
Operating the Jukebox
Using the Front Panel Features
CAUTION The next step is to turn off the jukebox.
Do not turn power to STANDBY in this jukebox until you are sure the
SCSI bus is inactive. Removing power from a SCSI peripheral when the
bus is active can result in data loss and/or indeterminate bus states.
Check your host system manuals for information about checking the
SCSI bus status.
14. Turn the jukebox OFF, then ON to save the code to the jukebox flash
ROM.
Setting a Non-Security Configuration
Figure 3-10 Menu Tree - Setting a Non-Security Configuration
Start with READY or SECURE in the display.
1. Press NEXT until CONF * displays.
2. Press ENTER . CONF 0 and a flashing 0 displays.
3. Press NEXT until the number of the option you want to change