HP Optical Jukeboxes - Manual (Page 53)

Chapter 3 3-15
Operating the Jukebox
Using the Front Panel Features
Operat
ing t
h
e
Jukebo
x
Follow these steps to set a security option
Start with READY or SECURE in the display.
1. Press NEXT until CONF * displays.
2. Press ENTER . CONF 0 displays. (The 0 is flashing.)
3. Press NEXT until the number of the option you want to change
displays.
4. Press ENTER . CODE 1 and a flashing 0 displays.
5. Press NEXT or PREV until the first number of your security code
displays.
6. Press ENTER . CODE 2 and a flashing 0 displays.
7. Press NEXT or PREV until the second number of your security code
displays.
8. Press ENTER . CODE 3 and a flashing 0 are displayed.
9. Press NEXT or PREV until the third number of your security code
displays.
NOTE NO CONFIG displays if you entered the wrong security code.
10. Press ENTER .
The current default setting displays. It may be any one of these
settings
• OFF or ON
• a number
11. Select the option you want by pressing NEXT or PREV .
12. Press ENTER . SET displays briefly.
The security option is set.
13. Press CANCEL to return to READY.