beautypg.com

Removing the tower cover, Installing the rack bezel – HP ProLiant ML570 G4 Server User Manual

Page 69

background image

Hardware options installation 69

2.

Remove the three T-15 Torx screws from each of the four casters and remove the casters.

Removing the tower cover

1.

Remove the two T-15 Torx screws that secure the tower cover to the server.

2.

Slide the tower cover toward the rear of the server and pull the cover away from the chassis.

3.

Turn the server over so that the access panel is on top.

Installing the rack bezel

1.

Remove the access panel (on page

27

).

See also other documents in the category HP Computer hardware: