Installing the server into the rack, On p – HP ProLiant ML570 G4 Server User Manual
Page 34
Setup 34
Item Description
21 Mouse
connector
22 Video
connector
23 Serial
connector
2.
Connect the power cord to the power supply.
3.
Open the power cord retaining clip and thread the power cord through the retaining clip.
4.
Snap the tab into place to secure the power cord.
5.
Connect the power cord to the AC power source.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important
safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed
against it. Pay particular attention to the plug, electrical outlet, and the point where
the cord extends from the server.
Installing the server into the rack
To install the server into a rack with square, round, or threaded holes, refer to the instructions that ship
with the rack hardware kit.
If you are installing the server into a telco rack, order the appropriate option kit at the RackSolutions.com
e server-specific instructions on the website to install
the rack brackets.
1.
Connect peripheral devices to the server.