HP Officejet J5740 All-in-One Printer - Manual (Page 138)

6. Replace the output tray.
7. Flip the tray extender up toward you.
NOTE: When you use legal-size paper, leave the tray extender closed.
Cause: The print or copy quality setting on the HP All-in-One is set too low.
Solution: Check the quality setting. Use a higher quality setting to increase the
amount of ink used for printing or copying.
To change the print speed or quality
1. Make sure you have paper loaded in the input tray.
2. On the File menu in your software application, click Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called
Properties, Options, Printer Setup, Printer, or Preferences.
5. Click the Paper/Quality tab.
6. In the Type is list, click the type of paper loaded in the input tray.
7. In the Print quality area, select the appropriate quality setting for your project.
Chapter 12
136 Troubleshooting