beautypg.com

Using a microphone – HP Pavilion t350.uk Desktop PC User Manual

Page 54

background image

46

user’s guide

4 Click the option for the number of speakers to match your multi-channel

speaker system, and then click Apply.

NOTE:

To test the speakers (multi-channel speakers only), click the Test

button. The WinDVD control panel shows the speaker number being used.
Click Stop.

5 Click OK.

NOTE:

If you want to play a stereo DVD, change the audio properties of

WinDVD to match the recorded DVD audio output.

using a microphone

Your PC comes with one microphone connector in the back of the PC. Some
models have a second microphone connector in the front of the PC. Only one
microphone connector works at a time, and the back connector is ready to use
unless you have the multi-channel audio speakers option. For PCs with the
multi-channel audio speakers option, the microphone connector in the front of
the PC, if present, is ready to use. See ”using the microphone with multi-channel
audio” on page 47.

To use a microphone connected to the front of your PC (select models only),
select the working microphone.

NOTE:

If you connect your microphone to the back of your PC, you do not need

to perform this procedure.

1 Double-click the Volume icon on the taskbar. The Volume Control settings

window opens.

NOTE:

If you do not see this Volume icon, click Start, click Control Panel,

click Sounds, Speech, and Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to open the Sounds and Audio
Devices Properties window. On the Volume tab, place a tick in the Place
volume icon in the taskbar tick box. Click Apply, and then click OK. The
Volume icon appears in the taskbar.

2 Select Options and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a tick in the Microphone tick box.
5 Click OK.
6 Click the Advanced button in the Microphone column. If you do not see the

Advanced button, select Options from the Recording Control window, and
then click Advanced Controls.

7 Place a tick in the Alternate Microphone tick box. (This box may be labelled

Mic2 Select or 1 Mic Boost.)