beautypg.com

On p – HP Pavilion t350.uk Desktop PC User Manual

Page 120

background image

112

user’s guide

installing a second hard drive

Some PC models may have an empty bay to add a second hard drive. You must
provide the drive and four 6/32 x ¼” screws (length of ¼-inch is 0.64 cm) to
secure the drive to the chassis.

1 Remove the side panel. See page 101.
2 Remove the front panel. See page 103.
3 Gently lay the PC on its side.
4 See ”removing the preinstalled hard drive” on page 109.

NOTE:

You do not need to remove the preinstalled hard drive from the

bracket when installing a second hard drive.

5 Remove the two screws on the hard drive bracket (N).

O

N

P

6 Slide the bracket away from the bottom of the chassis, and then pull it up and

out of the chassis (O).

7 Make sure the jumper on the new drive is in the CS (Cable Select) position.

Below is a drive with a Cable Select jumper installed. Your drive may vary.