HP Pavilion t350.uk Desktop PC - Manual (Page 136)

128 user’s guide
To reassemble the computer:
1 If you moved any cabling, restore the cable connections and routing.
2 Replace the fan duct and the side panel (see ”closing the computer” on
page 139).
3 Reconnect the power cable and all other cables.
4 Reconnect the modem/telephone cable.
5 Turn on the computer and all peripherals.
removing a memory module
1 Turn off the computer and all
peripherals.
2 Disconnect the
modem/telephone cable.
3 Disconnect the power cable and
all other attached cables (such
as the keyboard, mouse, and
monitor).
4 Remove the side panel and the
fan duct (see ”removing the
side panel” on page 123 and ”removing the fan duct” on page 124).
5 Locate the memory sockets on the motherboard.
6 Move any cabling out of the way, if necessary.
7 Push down the two retaining clips on the ends of the socket until the memory
module pops out of the socket.
WARNING: Do not pull the memory module out of the socket. Use
the retaining clips to eject the module.
8 Holding the memory module by its edges only, lift it away from the socket.
Store it in its antistatic packaging.
To install a new memory module in this socket, see ”installing a memory
module” on page 127.
DIMM and
DDR DIMM