HP Remote Insight Lights-Out Edition II Board - Manual (Page 52)

Using the RILOE II 52
4. Click Create to generate the image file in the specified location.
To create a diskette from an image file
1. Launch the Diskette Image Utility and click the Create Diskette tab.
2. Insert a blank diskette into the diskette drive.
CAUTION: If the diskette is not blank, all data on the diskette will be erased.
3. Enter the path and name of the image file and the target diskette drive.
4. To navigate to the location of the image file, click Browse. A page similar to the following
appears.