Set_vf_status runtime errors, Get_host_power_status, Get_host_power_status parameters – HP Remote Insight Lights-Out Edition II Board User Manual
Page 167: Get_host_power_status runtime errors, Get_host_power_status return messages, Set_host_power
Scripting, command line, and utility options 167
SET_VF_STATUS Runtime Errors
The possible SET_VF_STATUS error messages are:
•
RIB information is open for read-only access. Write access is required for this operation.
•
An invalid Virtual Floppy option has been given.
•
User does not have correct privilege for action.
•
Logged-in user does not have required privilege for this command.
GET_HOST_POWER_STATUS
The GET_HOST_POWER_STATUS command displays the server power state from the Virtual Power Button
cable. The GET_HOST_POWER_STATUS command must be displayed within a SERVER_INFO element,
and SERVER_INFO must be in write mode. The user must be logged in with login privilege to execute this
command.
Example:
GET_HOST_POWER_STATUS Parameters
There are no parameters for this command.
GET_HOST_POWER_STATUS Runtime Errors
The possible GET_HOST_POWER_STATUS error messages include:
•
Host power is OFF.
•
Host power is ON.
GET_HOST_POWER_STATUS Return Messages
The following information is returned within the response:
HOST POWER="OFF" /> SET_HOST_POWER The SET_HOST_POWER command sets the Virtual Power Button feature. This feature is used to turn the Example:
server on or off if the feature is supported. The SET_HOST_POWER command must be displayed within a
SERVER_INFO element, and SERVER_INFO must be in write mode. The user must be logged in with reset
server privilege to execute this command.