HP Remote Insight Lights-Out Edition II Board - Manual (Page 165)

Scripting, command line, and utility options 165
EJECT_VIRTUAL_FLOPPY Parameters
There are no parameters for this command.
EJECT_VIRTUAL_FLOPPY Runtime Errors
The possible EJECT_VIRTUAL_FLOPPY error messages are:
• RIB information is open for read-only access. Write access is required for this operation.
• No image present in the Virtual Floppy drive.
• User does not have correct privilege for action.
• Logged-in user does not have required privilege for this command.
COPY_VIRTUAL_FLOPPY
The COPY_VIRTUAL_FLOPPY command copies a floppy image from the RILOE II to the local system. The
COPY_VIRTUAL_FLOPPY command must be displayed within a RIB_INFO element, and RIB_INFO must be
in write mode. The user must be logged in with virtual media privilege to execute this command.
Example:
COPY_VIRTUAL_FLOPPY Parameter
IMAGE_LOCATION takes the full path file name for the location where the floppy image file needs to be
copied.
COPY_VIRTUAL_FLOPPY Runtime Errors
The possible COPY_VIRTUAL_FLOPPY error messages are:
• RIB information is open for read-only access. Write access is required for this operation.
• IMAGE_LOCATION must not be blank.
• Unable to open the Virtual Floppy image file.
• Unable to write the Virtual Floppy image file.
• No image present in the Virtual Floppy drive.
• User does not have correct privilege for action.
• Logged-in user does not have required privilege for this command.
GET_VF_STATUS
The GET_VF_STATUS command gets the Virtual Floppy Drive status from the RILOE II. The
GET_VF_STATUS command must be displayed within a RIB_INFO element, and RIB_INFO must be in
write mode. The user must be logged in with login privilege to execute this command.