HP Remote Insight Lights-Out Edition II Board - Manual (Page 154)

Scripting, command line, and utility options 154
MSG = "Error Message"/>
MOD_GLOBAL_SETTINGS
This command modifies certain global settings. This command is only valid inside a RIB_INFO block. The
logged-in user must have the configure RILOE privilege, and RIB_INFO must be in write mode. All of these
elements are optional and may be left out. If an element is left out, then the current setting is preserved.
Example:
MOD_GLOBAL_SETTINGS parameters
SESSION_TIMEOUT determines the maximum session timeout value in minutes. The accepted values are
from 0 to 120. If a value greater than 120 is specified, the SESSION_TIMEOUT returns an error.
F8_PROMPT_ENABLED determines if the F8 prompt for ROM-based configuration is displayed during
POST. The possible values are "Yes" or "No."
HOST_KEYBOARD_ENABLED determines if the host keyboard is enabled or disabled. The possible values
are "Yes" or "No."
REMOTE_CONSOLE_PORT_STATUS determines the configuration for the Remote Console port. The valid
values for this setting are: