Get_network_settings parameters, Get_network_settings runtime errors, Get_network_settings return messages – HP Remote Insight Lights-Out Edition II Board User Manual

Page 150

Scripting, command line, and utility options 150

GET_NETWORK_SETTINGS Parameters

There are no parameters for this command.

GET_NETWORK_SETTINGS Runtime Errors

There are no errors for this command.

GET_NETWORK_SETTINGS Return Messages

A possible GET_NETWORK_SETTINGS return message is:

SPEED_AUTOSELECT="YES"

NIC_SPEED="100"

FULL_DUPLEX="NO"

DHCP_ENABLE="YES"

DHCP_GATEWAY="YES"

DHCP_DNS_SERVER="YES"

DHCP_STATIC_ROUTE="YES"

DHCP_WINS_SERVER="YES"

REG_WINS_SERVER="YES"

IP_ADDRESS="111.111.111.111"

SUBNET_MASK="255.255.255.0"

GATEWAY_IP_ADDRESS="111.111.111.1"

DNS_NAME="test"

DOMAIN_NAME="test.com"

PRIM_DNS_SERVER="111.111.111.242"

SEC_DNS_SERVER="111.111.111.242"

TER_DNS_SERVER="111.111.111.242"

PRIM_WINS_SERVER="111.111.111.246"

SEC_WINS_SERVER="111.111.111.247"

STATIC_ROUTE_1 DEST="0.0.0.0" GATEWAY="0.0.0.0"

STATIC_ROUTE_2 DEST="0.0.0.0" GATEWAY="0.0.0.0"

STATIC_ROUTE_3 DEST="0.0.0.0" GATEWAY="0.0.0.0"

WEB_AGENT_IP_ADDRESS=""

A possible unsuccessful request is:

STATUS = "0x0001"

MSG = "Error Message"/>