HP Remote Insight Lights-Out Edition II Board - Manual (Page 168)

Scripting, command line, and utility options 168
SET_HOST_POWER Parameters
HOST_POWER enables or disables the Virtual Power Button. The possible values are "Yes" or "No."
SET_HOST_POWER Runtime Errors
The possible SET_HOST_POWER error messages include:
• Server information is open for read-only access. Write access is required for this operation.
• Virtual Power Button feature is not supported on this server.
• Host power is already ON.
• Host power is already OFF.
• User does not have correct privilege for action.
• Logged-in user does not have required privilege for this command.
GET_VPB_CABLE_STATUS
The GET_VPB_CABLE_STATUS command displays the Virtual Power Button cable status on the RILOE II.
The GET_VPB_CABLE_STATUS command must be contained within a SERVER_INFO block, and
SERVER_INFO must be in write mode. The user must be logged in with login privilege to execute this
command.
Example:
GET_VPB_CABLE_STATUS Parameters
There are no parameters for this command.
GET_VPB_CABLE_STATUS Runtime Errors
The possible GET_VPB_CABLE_STATUS error messages include:
• Virtual Power Button cable is attached.
• Virtual Power Button cable is not attached.
GET_VPB_CABLE_STATUS Return Messages
The following information is returned within the response:
VIRTUAL POWER BUTTON CABLE="ATTACHED"
/>