HP Remote Insight Lights-Out Edition II Board - Manual (Page 164)

Scripting, command line, and utility options 164
RESET_SERVER parameters
None
INSERT_VIRTUAL_FLOPPY
The INSERT_VIRTUAL_FLOPPY command copies a floppy image to the RILOE II. The
INSERT_VIRTUAL_FLOPPY command must be displayed within a RIB_INFO element, and RIB_INFO must
be in write mode. The user must be logged in with virtual media privilege to execute this command.
Example:
INSERT_VIRTUAL_FLOPPY Parameter
IMAGE_LOCATION takes the full path file name for the floppy image file.
INSERT_VIRTUAL_FLOPPY Runtime Errors
The possible INSERT_VIRTUAL_FLOPPY error messages are:
• RIB information is open for read-only access. Write access is required for this operation.
• IMAGE_LOCATION must not be blank.
• The Virtual Floppy image is invalid.
• Unable to open the Virtual Floppy image file.
• Unable to read the Virtual Floppy image file.
• The Virtual Floppy image file size is too big.
• No image present in the Virtual Floppy drive.
• Failed to allocate Virtual Floppy image space.
• User does not have correct privilege for action.
• Logged-in user does not have required privilege for this command.
EJECT_VIRTUAL_FLOPPY
The EJECT_VIRTUAL_FLOPPY command ejects the Virtual Floppy image if one is inserted. The
EJECT_VIRTUAL_FLOPPY command must be displayed within a RIB_INFO element, and RIB_INFO must be
in write mode. The user must be logged in with virtual media privilege to execute this command.
Example: