HP Color LaserJet 2550 Printer series - Manual (Page 99)

Resolving problems that generated messages
This section helps resolve problems that generated messages on the computer.
Messages for both Windows and Macintosh
This section lists some common errors that provide only a simple message but no
information for resolving the error. Errors that you see in HP Toolbox provide their own
instructions for resolving the error. For other errors that are generated by your operating
system, see the documentation for the operating system or computer.
Limit Check Error
Cause Solution
The print job is too complex. ● You might need to reduce the complexity of
the page or install more memory.
● Use one of the other printer drivers.
● Send the print job in smaller pieces or in
fewer pages.
Messages for Windows only
Message Solution
"Error writing to LPTx" in Windows 98 or Me ● Make sure that the tray contains print media.
● Make sure that the cables are connected
correctly, the printer is on, and the Ready
light is on.
● Print a Demo page from the HP Toolbox to
make sure that the computer can
communicate with the printer.
● On the Start menu, point to Settings and
click Printers. Right-click the HP color
LaserJet 2550 driver and select Properties.
Click Details and then click Port Settings.
Clear the Check Port State before
Printing check box and click OK. Click
Spool Settings, select Print Directly to
Printer, and click OK.
● Try printing again.
ENWW Resolving problems that generated messages 89