HP Color LaserJet 2550 Printer series - Manual (Page 31)

Transparencies that are used in the printer must be able to withstand 210° C (410° F), which
is the printer fusing temperature.
CAUTION To avoid damage to the printer, use only transparencies that are recommended for use in
laser printers. See
Accessories and ordering information .
For more information, see Printing on transparencies .
Supported media weights and sizes
This section contains information about the sizes, weights, and capacities of paper and other
print media that each tray supports.
Tray 1 specifications
Tray 1 Dimensions 1 Weight Capacity 2
Paper Minimum: 76 by 127 mm (3
by 5 inches) 60 to 177 g/m 2 (16 to 47 lb) Up to 125 sheets of 75 g/m 2
(20 lb) paper
Maximum: 216 by 356 mm
(8.5 by 14 inches)
Glossy paper Same as the preceding
listed minimum and
maximum sizes. 75 to 120 g/m 2 (20 to 32 lb) Maximum stack height: 12 mm
(0.47 inches)
HP Cover paper 4 203 g/m 2 (75 lb cover) 50 (typically)
Transparencies and
opaque film Thickness: 0.10 to 0.13 mm
(3.9 to 5.1 mils) 50 (typically)
Labels 3 Thickness: up to 0.23 mm
(up to 9 mils) 50 (typically)
Envelopes Up to 90 g/m 2 (16 to 24 lb) Up to 10
1 The printer supports a wide range of standard and custom sizes of print media. Check the printer driver for
supported sizes.
2 Capacity can vary depending on media weight and thickness, and environmental conditions.
3 Smoothness: 100 to 250 (Sheffield).
4 Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
ENWW Print-media specifications 21