To clear jams from output areas, To clear, Jams from output areas – HP Color LaserJet 2550 Printer series User Manual

Page 112: To clear jams from, Output areas

Text mode
Original mode

To clear jams from output areas

CAUTION

Jams in these areas might result in loose toner on the page. If you get toner on your clothes
or hands, wash them in cold water. (Hot water will set the toner into the fabric.)

1. Complete one of these steps:

●

If the jammed media is not almost completely visible from the top output bin, go to
step 2.

●

If the jammed media is almost completely visible, pull it carefully out of the printer
and go to the last step.

2. Open the rear output door.

3. If the leading edge of the sheet is visible from the rear opening, push down the two

green levers to release the fuser rollers, and carefully pull the sheet out. Close the rear
output door.

4. If the jam is too far into the printer to remove, turn off the printer and disconnect the

power cable.

102

Chapter 7 Problem solving

ENWW