HP 3Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 39)

Switch-port zone groups
To perform this task, expand the display for the active switch in the navigation tree, select Zone
Group, and then click Create Zone Group.
Options for this task include:
•
Name—Type a name to assign to the zone group (must be unique, up to 16 characters, with
no spaces).
•
Zoning Mode—Select Switch Port.
•
Switch ports—In the grid representing the switches, select the ports to be included in the zone
group.
To select a switch port, click an available (white) port. (The port status is automatically updated,
changing the color from white to blue.) To clear a selection, click the selected (blue) port. (The
port status is automatically updated, changing the color from blue to white).
Status Color
Selectable—Not yet assigned to a zone group and can be added to this zone group. White
Selected—Selected in this session or already a member of this zone group. Blue
Not Selectable—Assigned to a different zone group or attached to storage enclosures
without port-based zoning capabilities. Can not be selected. Gray
Create Zone Group task 39