HP 3Gb SAS Switch for HP BladeSystem c-Class User Manual

Page 19

Text mode
Original mode

The following devices are used in this example:

Model

Device type

c7000

c-Class enclosure

ProLiant BL 460c G1 and ProLiant BL 465c G1

Server blades

P700m

SAS mezzanine cards

3Gb SAS BL Switch, installed in interconnect bays 7 and 8

SAS switch blades

MSA2000sa

External SAS storage enclosures

Change the Multi-initiator Mode setting to Enabled. This setting allows multiple servers to be
assigned the same zone group and have access to the same storage enclosure.
a.

Access VSM and select the Zoning tab.

Select the switch and click Advanced Settings.

When prompted, expand the Multi-initiator Mode drop-down box and change the setting
to Enabled. Then, click OK.

NOTE:

As shown in this example, if status alerts exist for an item selected in the navigation

tree, the View Status Alerts button is displayed.