Example, Timeform, Values – HP 3PAR StoreServ 7000 Storage User Manual
Page 136: Begintsecs, Value, Values: example
example:
The following example specifies that all the time axis points should be labelled:
&alllabels=1
timeform
Use the timeform option to specify a time format (either relative or absolute) when using
a report that requires a time range. This option can only be specified once in a given query string.
values:
Specify one of the following:
relative
Times used in the table(s) and/or chart(s) will be expressed relative to the present and expressed
as using the format
hours, minutes and seconds ago.
absolute
(Default). Times used in the table(s) and/or chart(s) will be expressed in the following format:
yyyy/mm/dd hh:mm:ss
.
full
The times used in the table(s) and/or chart(s) will be expressed in the following format: yyy/mm/dd
hh:mm:ss.
auto
The times used in the table(s) and/or chart(s) will be expressed depending on the resolution that
is selected.
example:
The following example specifies that the time formats should be expressed in terms relative to the
present point in time:
&timeform=relative
begintsecs
Use the begintsecs option to specify a start time when using a report that requires a time range,
or to indicate a specific point in time when using other report types.
If this option is not defined,
•
for reports that require a time range, the earliest available time is applied.
•
for reports that only require a begintsecs time, the most recent available time is applied.
•
for objects_present reports (see
“Objects Present Reports” (page 169)
), the earliest
available time is applied.
NOTE:
Available times may vary according to the database table being used (specified with the
category option, as described in
).
This option can only be specified once in a given query string.
value:
136
Web Queries