HP 3PAR StoreServ 7000 Storage - Manual (Page 121)

Table 57 Metric (continued)
Data Tables Description Metrics
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Write KBytes/sec write_kbps
statpd_ssd150, statpd_sum,
statpd_nl7sum,statpd_fc10sum,
statpd_fc15sum,statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Total (read + write) KBytes/sec total_kbps
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Read service time in millisec averaged
over the sample read_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Write service time in millisec write_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total (read + write) service time in millisec total_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Read IO Size in KBytes read_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Write IO Size in KBytes write_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total (read + write) IO Size in KBytes total_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total queue length total_qlen
statcpu Percentage idle time for the node idle_perc
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total utilization per second. For instance,
when the PD utilization exceeds a given total_utilperc
high (say 90%) utilization meaning that
90% of the time there is some IO
operation outstanding at the PD.
Direction
Specifies whether the Metric should be less than (<) or greater than (>) the Limit Value for the alert
to be generated.
Limit Value
Specifies the value that the Metric is compared to. This should be a number.
Limit Count
The alert will only be generated if the number of objects for which the Metric exceeds the Limit
Value (in the direction specified by Direction) is greater than Limit Count in any given sample. This
should be an integer.
Condition
Specifies the condition (min_read_iops, min_write_iops, min_total_iops) that should be monitored.
Configuring Rules for Email Alerts 121