HP 3PAR StoreServ 7000 Storage - Manual (Page 131)

Compares selected disk magazine position. This value is only available for the pd_space_time
report.
example:
The following example specifies that all logical disks are compared:
&compare=LD
comparesel
When the compare option (see “compare” (page 129) ) is used, up to 16 objects can be compared.
However, if there are more than 16 objects selected, then the comparesel option is used to select
a metric. The 16 objects with the highest peak values of the metric are chosen to be compared.
values:
Specify one of the following to choose the peak metric:
total_iops
(Default) The total (read + write) IOPs for the object.
total_kbps
The total (read + write) bandwidth (KBytes/s) for the object.
total_svctms
The total (read + write) service time in millisec for the object.
total_qlen
The total queue length for the object.
busy_pct
The percentage of time that the object is busy (i.e., has at least one outstanding operation).
cpu_busy
The percentage of CPU busy time.
interrupts
The CPU interrupts per second.
ctxtsws
The CPU context switches per second.
total_space
The total selected space.
raw_space
The raw space (including RAID overhead).
used_space
The used space.
free_space
The free space.
TotalRsvdSize
The total reserved size.
TotalRawSize
The total raw (including RAID overhead) size.
VirtSize
Report Options 131