HP StorageWorks XP Remote Web Console Software - Manual (Page 63)

3. In the tree, select the port, host group, iSCSI target, or LUN containing the Snapshot XP pairs you
want to delete. A list of pairs or volumes appears in the volume list.
4. Select and right-click the Snapshot XP pairs you want to delete, and select Pairsplit-S. The Pairsplit-S
pane ( Figure 17 ) appears.
NOTE:
You cannot delete a Business Copy XP pair and Snapshot XP pair at one time.
5. Click OK. The Pairsplit-S pane closes, and a list of Snapshot XP pairs you are deleting appears in the
Preset list on the Business Copy XP main pane.
6. Click Apply. A confirmation message appears.
7. Click OK. The confirmation message closes, and the pair is deleted from the array.
Figure 17 Pairsplit-S pane
•
Volume list: Information about the Snapshot XP pairs you are deleting.
• Port: P-VOL's port ID (cluster and channel number)
• G-ID: Group number of the P-VOL's host group or iSCSI target
• LUN: P-VOL's CU:LDEV (control unit image:logical device ID)
• MU: Snapshot ID
• Status: Status of the Snapshot XP pair
• Port: S-VOL's port ID (cluster and channel number)
• G-ID: Group number of the S-VOL's host group or iSCSI target
• LUN(S): S-VOL's CU:LDEV (control unit image:logical device ID)
• Type: Emulation type
• Capacity(MB): Snapshot XP pair's storage capacity
• CLPR(P): P-VOL's cache logical partition
• CLPR(S): S-VOL's cache logical partition
• OK button: Closes the Pairsplit-S pane, and displays a list of Snapshot XP pairs in the Preset list.
• Cancel button: Cancels the operation, and closes the Pairsplit-S pane.
HP StorageWorks Snapshot XP user guide 63