HP StorageWorks XP Remote Web Console Software - Manual (Page 60)

NOTE:
• The value you specify as the interval between LDEV numbers counts only available LDEV numbers
and skips those that are not selectable.
• Even when you use multiple CUs, LDEV numbers are assigned according to the setting in the
Interval list.
• CU number of another SLPR is used.: Used to select the CU numbers of an SLPR other than
the SLPR you are now in.
• Back button: Returns to the Create V-VOL wizard pane (1) while maintaining settings in this pane.
• Next button: Fixes the setting in this pane, and displays the Create V-VOL wizard pane (3).
• Cancel button: Cancels the setting in the Create V-VOL wizard pane (2), and closes the pane.
Figure 16 Create V-VOL wizard pane (3)
•
V-VOL information setting list (middle of pane): Information about the V-VOLs you are creating.
• VDEV: VDEV number
• Emulation: V-VOL's emulation type
• Capacity: V-VOL's capacity
• CU:LDEV: V-VOL's CU and LDEV numbers
• Back button: Returns to the Create V-VOL wizard pane (2) while maintaining settings in this pane.
• OK button: Fixes the setting in the Create V-VOL wizard pane (3), and closes the pane.
• Cancel button: Cancels the setting in the Create V-VOL wizard pane (3), and closes the pane.
60 Snapshot XP operations