HP NetRAID 1 Controller - Manual (Page 63)

59
SCO UNIX Monitor Messages
Condition Messages
Monitor starts HP NetRAID Monitor activated
Monitor deactivated HP NetRAID Monitor deactivated
No adapter found No HP NetRAID Adapter found
Adapter inquiry failed HP NetRAID inquiry failed for adapter x
Physical drive state change Adapter: # PDrv Channel: SCSI ID # state change from
(previous state) to (new state).
Physical drive rebuilding
(when monitor starts) Adapter: # PDrv Channel: SCSI ID# At startup is in
Rebuild state
Rebuild percentage
completed Adapter: # PDrv Channel: SCSI ID# Rbld X% over
Rebuild failed Adapter: # PDrv Channel: SCSI ID# Rbld failed
Rebuild over (completed) Adapter: # PDrv Channel: SCSI ID# Rbld over
Logical drive state change Adapter: # LDrv # state change from (previous state) to
(new state).
Logical drive state at startup Adapter: # LDrv # state at startup is (current state)
SCO UNIX Monitor Activate/Deactivate Messages
Banyan Vines 6.0 (0) Monitor Messages
Condition Messages
Physical drive state change HP NetRAID Monitor Ver x.xx WARNING: Physical drive
(Host adapter #, Channel: SCSI ID #) State changed from
(previous state) to (next state).
No adapter found HP NetRAID Monitor Ver x.xx program found no HP
NetRAID Controller.
Monitor has started for
specified adapter HP NetRAID Monitor Ver x.xx program started for #
adapter(s).
I/O controller error HP NetRAID Monitor Ver x.xx: Host Inquiry failed for host
adapter #, ioctl error #.
Failed to ascertain I/O status
for specified adapter HP NetRAID Monitor Ver x.xx: Host Inquiry failed for host
adapter #, io.status #.
Unable to count number of
disks on specified adapter HP NetRAID Monitor Ver x.xx: Failed to get number of disks
on host adapter #.
Banyan Vines 6.0 (0) Monitor Messages