HP Systems Insight Manager - Manual (Page 228)

In addition to these "automatic" EV's, user-defined environment variables may be set as part of
scripting in the TDEFs.
Table 38 Environment Variables
Description Names values
The short string type of event (like Discovered Device) NoticeLabel
Shows whether the event has been cleared NoticeState
Plain text description of the event and also includes whether
it is set to In Progress, Cleared, or Not Cleared NoticePlainText
The raw data of the event that was sent and in a string
format. It is in a pipe (|) delimited format that can be used
for simple parsing NoticeRawData
Can be Critical, Major, Minor, Unknown, Normal,
Warning, or Informational NoticeSeverityStr
An integer format of the severity NoticeSeverity
1 – Normal
2 – Warning
3 – Minor
4 – Major
5 – Critical
6 – Informational
Displays the event list that generated the event. In the format
of: NoticeQueryName
•
This device or event meets the following query criteria:
+QueryName;
•
This device or event now meets the following query
criteria:
+QueryName;
•
This device or event no longer meets the following query
criteria:
QueryName
Name of the device that generated the event DeviceName
Number of IPX addresses that are mapped to this device DeviceIpxAddressCount
Number of IP addresses that are mapped to this device DeviceIPAddressCount
Based on the count of IP addresses, %d is an integer that
shows the actual IP address. For example, if DeviceIPAddress%d
DeviceIPAddressCount=2 then
DeviceIPAddress0=111.111.111.111 and
DeviceIPAddress1=222.222.222.222.
Based on the MAC address count, %d is an integer that
references the actual MAC address variable. If DeviceMACAddress%d
DeviceMACAddressCount=2 then,
DeviceMACAddress0=00:80:5E:7F:B0:81 and
DeviceMACAddress1=00:80:C7:29:EF:B6
If tied to an event list and the event was a SNMP trap, then
this is set to the SNMP generic trap ID of the trap received GenericTrapID
If tied to an event list and the event was a SNMP trap, then
it is set to the SNMP specific trap ID SpecificTrapID
228 Custom tool definition files