Discovery, Configuring hp sim with storage systems, Subscribe to wbem indication events – HP Systems Insight Manager User Manual
Page 140: Discovery configuring hp sim with storage systems
3.
Select (4) to import the management server's certificate into the CVAE provider's truststore for
event indications. Enter the following:
•
Enter alias: Use the management server's DNS name (for example: hostname.hp.com).
•
Enter truststore-password: indtrust
•
Enter authenication-filename (absolute path): Enter path to management server's certificate
file.
For additional information, refer to the HP Storageworks P9000 and XP Event Notification
whitepaper.
Discovery
To discover an XP P9500 array, you can either discover it with a CVAE server or discover it with
embedded SMI-S. Do not use both methods of discovery together because there are chances for
Data collection and WBEM subscriptions to fail.
The HP SIM discovery process for systems running Command View includes the following:
•
CV XP on port 80 (http)
•
CV VA/SDM on port 4096 (http)
•
CV TL on port 4095 (http)
•
Discovery of Command View EVA is encapsulated within the discovery of the HP StorageWorks
Storage Management Appliance on ports 2301 or 2381
HP SIM must be permitted to access the web server.
NOTE:
To access the links to Command View, select Tools
→System Information→System
Page
→Links.
To configure Command View and SDM:
Procedure 36 Configuring Command VIEW and SDM
1.
Verify that the HP SIM CMS is within a secure
in the Command View server
configuration.
•
Host based
CMS IP address included in .../sanmgr/hostagent/config/access.dat.
•
Storage Area Manager management server (if applicable)
CMS station IP address included in /sanmgr/managementserver/config/
authorizedClients.dat
.
2.
Run discovery to discover or re-identify the Command View systems.
3.
When discovery is complete, you can group systems in HP SIM and launch Command View
from the System Page.
To load the EVA MIB, enter mxmib -a cpqhsv110v3.cfg.
NOTE:
Loading the MIB could take several minutes to complete.
Configuring HP SIM with storage systems
For optimal interaction between HP SIM and
, complete the following procedures.
Subscribe to WBEM indication events
If a storage systems SMI-S provider supports WBEM indication events and you want to view WBEM
indication events on the event table view page, you must subscribe to WBEM events for the storage
system.
140 Storage integration using SMI-S