Connecting to a wlan, Roaming to another network, Connecting to a wlan roaming to another network – HP EliteBook 2740p Tablet-PC User Manual

Page 37

Connecting to a WLAN

To connect to the WLAN, follow these steps:

Be sure that the WLAN device is on. If it is on, the wireless light is blue. If the wireless light is
amber, press the wireless button.

NOTE:

On some models, the wireless light is amber when all wireless devices are off.

Select Start > Connect to.

Select your WLAN from the list, and then type the network security key, if required.

●

If the network is unsecured, meaning that anyone can access the network, a warning is
displayed. Click Connect Anyway to accept the warning and complete the connection.

●

If the network is a security-enabled WLAN, you are prompted to enter a network security
key, which is a security code. Type the code, and then click Connect to complete the
connection.

NOTE:

If no WLANs are listed, you are out of range of a wireless router or access point.

NOTE:

If you do not see the network you want to connect to, click Set up a connection or

network. A list of options is displayed. You can choose to manually search for and connect to a
network or create a new network connection.

After the connection is made, place the cursor over the network status icon in the notification area, at
the far right of the taskbar, to verify the name and status of the connection.

NOTE:

The functional range (how far your wireless signals travel) depends on WLAN

implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.

More information about using a WLAN is available through the following resources:

●

Information from your ISP and the manufacturer's instructions included with your wireless router
and other WLAN equipment

●

Information and Web site links provided in Help and Support

For a list of public WLANs near you, contact your ISP or search the Web. Web sites that list public
WLANs include Cisco Internet Mobile Office Wireless Locations, Hotspotlist, and Geektools. Check
with each public WLAN location for cost and connection requirements.

For additional information on connecting your computer to a corporate WLAN, contact your network
administrator or IT department.

Roaming to another network

When you move your computer within range of another WLAN, Windows attempts to connect to that
network. If the attempt is successful, your computer is automatically connected to the new network. If
Windows does not recognize the new network, follow the same procedure you used initially to
connect to your WLAN.

Using a WLAN