Enabling the iamt solution, Using the mebx setup utility menus – HP EliteBook 2740p Tablet-PC User Manual
Page 166
Using Intel Active Management Technology (select
models only)
Intel® Active Management Technology (iAMT) allows discovery, repair, and protection of networked
computing assets. With iAMT, computers can be managed whether they are on or off. The iAMT
solution is available on computers with Intel Centrino® with vPro mobile technology.
Features of iAMT include:
●
Hardware inventory information
●
Event notification
●
Power management
●
Remote diagnosis and repair
●
Hardware-based isolation and recovery—limit or cut off computer network access if virus-like
activity is detected
Enabling the iAMT solution
To configure iAMT settings:
NOTE:
The
ctrl-p
prompt is visible only if the AMT Setup Prompt option is enabled in Computer
Setup.
1.
Turn on or restart the computer.
2.
Before Windows starts up, press
ctrl-p
.
NOTE:
If you do not press
ctrl-p
at the appropriate time, you must repeat steps 1 and 2 to
access the MEBx setup utility.
3.
Enter the ME password. The factory setting for the password is admin.
The MEBx setup utility opens. Use the arrow keys to navigate.
4.
Choose to configure Intel ME, configure iAMT, or change the Intel ME password.
5.
When you have made your selections, select Exit to close the MEBx setup utility.
Using the MEBx setup utility menus
NOTE:
For more information on iAMT, go to the Intel Web site at
, and then
search for iAMT.
Intel ME Configuration
Select
To do this
Intel ME State Control
Disable/enable the management engine.
Intel ME Firmware Local Update
Disable/enable local management of firmware updates.
LAN Controller
Disable/enable the integrated network controller.
154 Chapter 16 Management and printing