HP NonStop G-Series User Manual
Page 64
HP NonStop Time Synchronization User’s Guide
Page 64 of 81
1002: TimeSync version started
TimeSync started successfully.
version
is the version of TimeSync; for example, 1.0.126.
Cause. TimeSync was started on the system.
Effect. TimeSync begins processing.
Recovery. Not applicable.
1003
1003: TimeSync could not initiate operations; shutting down
TimeSync could not initiate operations with the communication layer, and is shutting
down as a result. This error only occurs during startup.
Cause. TimeSync could not obtain a network connection, therefore it could not start
successfully.
Effect. TimeSync does not start.
Recovery. Check to be sure that all network infrastructure is up and running (network
device drivers, TCP/IP processes/daemons, etc.), and ensure that TimeSync is not
configured to use a LocalPort that is currently being used by a different application.
1004
1004: TimeSync shutting down due to error
TimeSync encountered an internal error during normal processing that it could not
recover from, and is shutting down as a result.
Cause. An internal processing or resource error occurred from which TimeSync could not
recover.
Effect. TimeSync shuts down.
Recovery. Check the system log and/or TimeSync log for additional messages detailing
the specific cause of the error.