HP NonStop G-Series - Manual (Page 51)

HP NonStop Time Synchronization User’s Guide Page 51 of 81
- the DNS host name of the new time source.
- the port number of the new time source.
Examples
timecom
> add TimeSources 16.32.101.10:123
timecom –add TimeSources 17.34.45.56:19095
6.2 CONF Command
The CONF command instructs the TimeSync server to load the specified configuration file.
The CONF command can only be issued against the local TimeSync server. The command
can be issued as a command-line parameter or can be entered interactively at a TimeCom
prompt.
It is important to distinguish between the CONF command and the SERVERCONF
command. The CONF command causes the TimeSync process to load the specified
configuration file, while the SERVERCONF command causes TimeCom to load the
specified configuration file.
- is the name of the configuration file to load. If is not provided,
TimeSync will load the default configuration file from the default location.
Examples
timecom
> conf /etc/timesync/myconf.conf
timecom –conf $USERS.DATA.TIMECNF
6.3 FC Command
The FC command edits and re-executes the prior TimeCom command. When you enter
the FC command, TimeCom displays the prior command executed, and on the subsequent
line displays a single “.” prompt; this is known as an “editing template”. You can then edit
CONF []