Auto two-sided print, Accessory with small paper tray specifications – HP Deskjet 6988dt Printer User Manual
Page 176

Binding margin is in the wrong place
1.
Open the
dialog box.
2.
Click the Finishing tab.
3.
Verify that the following conditions exist:
–
Flip pages up is not selected for binding along the side (book binding).
–
Flip pages up is selected for binding along the top (tablet binding).
For more information, see
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
●
The
are set in both the printer software and the software
program that you are using.
●
The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See
storing and handling photo paper
for more
information.
●
The media type and size that is selected on the Paper/Quality tab are supported
by the
.
If the media type or size is not supported by the duplexer, you can print the document
by using the
manual two-sided printing instructions
Note
Do not try to print a two-sided document on single-sided paper, such
as single-sided photo paper.
Colors look faded
If the colors look faded, try printing the two-sided document by using the
.
Auto Two-Sided Print Accessory with Small Paper Tray specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for paper
fed into the printer through the printer In tray, see the
.
Small paper tray specifications
Media thickness: 7-12 mils
Chapter 12
174
HP Deskjet 6980 series