HP XP P9500 Storage - Manual (Page 91)

Description Item
Port on the remote system. Pair-Port
Serial number and LDKC number of the remote system. S/N
Controller ID and model name (in parenthesis) for the remote system. Controller ID
Path group ID Path Gr. ID
Type of channel interface between local and remote systems. Always displays column displays
“Fibre”. M-R Path
Minimum possible number of paths between the local and the remote systems. Minimum Paths
Remote I/O missing interrupt handler timer value—the wait time for data transfer from the local
to remote system to complete. RIO MIH
Date and time when local and remote systems were associated to each other DKC Registered
Date and time the last operation on a logical path to the remote system was performed. Last Updated
When clicked, the DKC Operation window refreshes when it is redisplayed. Refresh the DKC
Operation tab after
this panel is closed
History of operations for data volume pairs
The History window provides the history of operations for data volume pairs. For example, the
window shows the date and time when data volume pairs are created or released.
To open the History window, do either of the following:
If Continuous Access Journal Z has not been started:
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal Z >
History.
The History window opens. The History window may not show the latest operation history.
To view the latest operation history, go to the next step.
2. Select File > Refresh. The operation history is updated.
If Continuous Access Journal Z has already been started:
1. Click the History tab to open the History window.
The History window may not show the latest operation history. To view the latest operation
history, go to the next step.
2. Select File > Refresh. The operation history is updated.
Monitor logical path status 91