Ethernet switch 2510–24 specifications – HP 9000 Virtual Library System User Manual
Page 230
Specification
Item
Temperature
•
Operating: 41° to 104° F (5° to 40° C)
•
Non-operating: 4° to 158° F (20° to 70° C)
Humidity
•
Operating: 10% to 90% non-condensing
•
Non-operating: 10% to 95% , non condensing
Altitude
•
Operating: 0 to 10,000 ft.
•
Non-operating: 0 to 50,000 ft.
Shock
•
Operating: 4 G, 11 ms, 20 repetitions
•
Non-operating: 30 G, 13 ms, trapezoidal
Vibration
•
Operating: 5-500 Hz, random, 0.2 G
•
Non-operating: 2-200 Hz, random, 0.5 G
Power consumption
100 to 240 VAC (operational)
Supported power range
50 to 60 Hz
Frequency
80 watts nominal; 90 watts typical maximum
Heat output
Ethernet Switch 2510–24 Specifications
Specification
Item
9.3 x 17.42 x 1.73 in. (23.62 x 44.25 x 4.39 cm) 1U height
Dimensions
4.9 lb (2.2 kg) fully loaded
Weight
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX); 1 RJ—45 serial console port; 2 dual-personality ports,
Ports
each of which can be used as either an RJ-45 10/100/1000 port or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
MIPS, 264 MHz
Processor
8 MB
Flash capacity
64 MB
RAM/ROM capacity
384 KB
Packet buffer size
< 4.9 µs (64-byte packets)
Latency (100 Mb)
< 2.6 µs (64-byte packets)
Latency (1000 Mb)
6.5 million pps (64-byte packets)
Throughput
8.8 Gbps
Switching capacity
8000 entries
MAC address table size
68 BTU/hr
Maximum heat dissipation
100-127 VAC/200-240 VAC
Voltage
0.75 A /0.4 A
Current
20 W
Power
50/60 Hz
Frequency
230 Specifications