HP 9000 Virtual Library System - Manual (Page 177)

Status Description Item
To determine Power cap status, see HP Systems
Insight Display LEDs and Internal Health LED
Combinations
.
Power cap LED 1
Green = Network link exists NIC LEDs 2
Flashing green = Network link and activity exist
Off = No link to network exists
If power is off, the front panel LED is not active. For
status, see
Rear Panel LEDs and Buttons .
Green = AMP mode enabled AMP status 3
Amber = Failover
Flashing amber = Invalid configuration
Off = AMP mode disabled
Amber = Failure All other LEDs
Off = Normal.
For possible failure causes, see HP Systems Insight
Display LEDs and Internal Health LED Combinations .
NOTE: The HP Systems Insight Display LEDs represent the system board layout.
HP Systems Insight Display LEDs and Internal Health LED Combinations
When the internal health LED on the front panel illuminates either amber or red, the server is
experiencing a health event. Combinations of illuminated system LEDs and the internal health LED
indicate system status.
Status System power
LED Internal health LED
color HP Systems
Insight Display
LED and color
One or more of the following conditions may exist: Amber Red Processor (amber)
• Processor in socket X has failed.
•
Processor X is required yet not installed in the socket.
VLS9200 Node Components, LEDs, and Buttons 177