HP Designjet 3D Printer series - Manual (Page 68)

64
Pr
inter Spec
ifications
Workstation specifications
Power specifications
Ecological specifications
For the up-to-date ecological specifications of your printer, please go to http://www.hp.com/
and search for “ecological specifications”.
Environmental specifications
Acoustic specifications
Operating System Microsoft Windows XP, Microsoft Windows Vista or Microsoft Windows 7
Processor Minimum: 2.4 GHz
Faster processors will shorten job processing times
RAM Minimum: 1GB (2GB for Windows Vista or Windows 7)
Recommended: 2GB (3GB for Windows Vista or Windows 7)
Hard Disk Installation: 90MB
Monitor graphics
resolution
Minimum: 1024x768
Recommended: 1280x1024 (wide screen acceptable)
Video Card Required: OpenGL compliant accelerated graphics card
Recommended: Hardware support for OpenGL
Recommended 128MB graphics card memory
Source (nominal) 100–240VAC ~ 12 - 7A 50/60Hz 1200W
Do not use an extension cord or a power strip, using these can possibly
cause intermittent power issues.
Temperature range
.
59◦F to 86◦F (15◦C to 30◦C)
Relative humidity range 30 to 70 percent, non condensing
Heat emission
2550 BTU/hr typical
Idle sound pressure at bystander 55 dBA
Operating sound pressure at
bystander
62 dBA