HP LaserJet 4250 - Manual (Page 34)

To set the auto continue
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE.
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE.
4. Press ( D
OWN
button) to highlight SYSTEM SETUP.
5. Press ( S
ELECT
button) to select SYSTEM SETUP.
6. Press ( D
OWN
button) to highlight AUTO CONTINUE.
7. Press ( S
ELECT
button) to select AUTO CONTINUE.
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Cartridge low
The printer has two options for reporting that print cartridge life is low: CONTINUE is the
default value.
● Select CONTINUE to allow the printer to continue printing while a warning appears and
until the print cartridge is replaced.
● Select STOP if you want the printer to pause printing until you replace the used print
cartridge or press (
S
ELECT
button), which allows the printer to print while the warning
appears.
To set supplies-low reporting
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE.
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE.
4. Press ( D
OWN
button) to highlight SYSTEM SETUP.
5. Press ( S
ELECT
button) to select SYSTEM SETUP.
6. Press ( D
OWN
button) to highlight CARTRIDGE LOW.
7. Press ( S
ELECT
button) to select CARTRIDGE LOW.
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
22 Chapter 1 Printer basics ENWW