HP LaserJet 4250 - Manual (Page 236)

Item Values Explanation
CARTRIDGE
OUT
STOP
*CONTINUE
Determines how the printer reacts if the print
cartridge is empty.
STOP: The printer stops printing until you
replace the print cartridge.
CONTINUE: The printer continues to print, and
the REPLACE CARTRIDGE message appears
until you replace the print cartridge. HP does not
guarantee print quality if you select CONTINUE
after a REPLACE CARTRIDGE condition.
Replace the print cartridge as soon as possible
to ensure good print quality.
If the end of drum life is reached, the printer
stops, regardless of the CARTRIDGE OUT
setting.
JAM RECOVERY *AUTO
OFF
ON
Determines how the printer behaves if a jam
occurs.
AUTO: The printer automatically selects the best
mode for printer jam recovery (usually ON).
OFF: The printer does not reprint pages
following a jam. Printing performance might be
increased with this setting.
ON: The printer automatically reprints pages
after a jam is cleared.
RAM DISK *AUTO
OFF
Determines how the RAM disk is configured.
This item appears only if no optional hard-disk
accessory is installed.
AUTO: Allows the printer to determine the
optimal RAM-disk size based on the amount of
available memory.
OFF: The RAM disk is not available.
NOTE
If you change the setting from OFF to AUTO, the
printer automatically reinitializes when it
becomes idle.
LANGUAGE *ENGLISH
Several
Selects the language for the messages that
appear on the printer control-panel display.
Stapler/stacker submenu
Use this submenu to select settings for the optional stapler/stacker, if it is installed.
Some items on this menu are available in the program or printer driver (if the appropriate
driver is installed).
The section that follows lists the settings and possible values. In the Values column, the
default value for each setting is the one that has an asterisk (*) next to it.
224 Appendix B Control panel menus ENWW