HP Netserver L Server series User Manual

Page 57

Chapter 5

Error Message Reference

Code

Description

Recommended Action

6. Check for proper termination, using technical reference card or label.

7. Check system fans

8. Check firmware version of drive and update if necessary.

9. Replace the drive

10. Change the card or board that has the drive’s controller.

0516h

Tape buffer error.

1. Use a cleaning cartridge to make sure heads are clean.

2. Replace the tape.

3. Check cables and connections: a) to SCSI components, b) to power source, c)
between cards and backplane.

4. Inspect SCSI pins to ensure none are bent.

5. Check seating of board or SCSI card.

6. Check for proper termination, using technical reference card or label.

7. Check system fans

8. Check firmware version of drive and update if necessary.

9. Replace the drive

10. Change the card or board that has the drive’s controller.

0520h

No CD in drive.

1. Insert a CD in the CD-ROM drive, or replace the existing CD.

2. Check cables and connections: a) to SCSI components, b) to power source, c)
between cards and backplane.

3. Inspect SCSI pins to ensure none are bent.

4. Check seating of board or SCSI card.

5. Check for proper termination, using technical reference card or label.

6. Check system fans

7. Check firmware version of drive and update if necessary.

8. Replace the drive

9. Change the card or board that has the drive’s controller.

0522h

DiagTools Error

Download a new version of DiagTools from the HP web site and run it. If you
get the same error, call the HP Customer Care Center.

0521h

CD-ROM read error.