HP Netserver L Server series User Manual
Page 51
Chapter 5
Error Message Reference
47
Code
Description
Recommended Action
4. Change the system board.
0302h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0303h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0304h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0305h
Reset failed.
DiagTools issued a
reset command and
it was not accepted
or confirmed by the
floppy disk
controller.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0307h
Drive parameter
activity failed.
1. Try a different diskette.
2. Check the cable between the floppy and the system board.
3. Change the floppy drive.
4. Change the system board.
0308h
DMA Overrun
error.
1. Try a different diskette.
2. Check the cable between the floppy and the system board.
3. Change the floppy drive.
4. Change the system board.
0309h
Attempt to DMA at
64 KB boundary.
1. Try a different diskette.
2. Check the cable between the floppy and the system board.
3. Change the floppy drive.
4. Change the system board.
030Ah
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0310h
Floppy CRC or
ECC data error.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0311h
DiagTools Error
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
0321h
The circuit that
detects changed
diskettes is not
working.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0322h
Floppy Speed
Error.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0340h
Seek operation
failed.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.